Scheduling The Washing Time; Starting The Programme - Beko DIT16221 Instruction Manual

Interior Lighting (Depends on the
model)
Some models have interior lighting to
illuminate the interior when the door
is opened.
Changing the interior lighting
setting
1. After turning on the machine,
press and hold Time Delay and
Programme keys simultaneously
for 3 seconds.
2. Press the programme key until
the Rinse Aid icon starts to flash.
The applicable options will be
displayed on the programme
indicator as follows:
Interior lighting ON - [P1]
Interior lighting OFF - [P3]
3. You can turn ON or OFF the interior
lighting with the time delay key.
4. Turn off the machine with On/Off
key to save the changes.
Scheduling the washing
time
Time Delay
If an economical electricity tariff is
applied in your region, you can use
the Time Delay function to wash your
dishes during appropriate hours.
You can delay the start of the
selected programme until 9 hours.
1. Press the Time Delay function
key after selecting the washing
programme and other auxiliary
functions.
2. Once you press the Time Delay key
"3 hours" Time Delay indicator will
start flashing.
3. Set the desired time by pressing
the Time Delay key. Each press on
the key will increase up to 9 hours
with 3-hour increments.
4. Close the door of your machine
after setting the Time Delay.
Once the delay time is over, the
selected programme will start
automatically.
C
The time delay will start
countdown with the closing of
the door after selecting the Time
Delay function.
C
If the door is opened while the
Time Delay function is active, the
countdown will be paused and
start icon will start to flash.
Changing the settings while Time
Delay function is active
While the Time Delay function is
activated, you cannot make changes
in the washing programme, auxiliary
functions or the duration of time
delay.
C
Programme and auxiliary
functions cannot be set/changed
after the programme has started.
To cancel the Time Delay function
To cancel the process while the
Time Delay function is active the
programme should be canceled.
C
Time Delay function cannot be set
after the programme starts.

Starting the programme

Close the door of your machine to
start it after selecting the programme
and auxiliary functions.
C
Your machine performs water
softening depending on the
hardness level of the supply
water. Washing time can change
while the programme is running
depending on the ambient
temperature where your machine
is installed, temperature of the
supply water and amount of the
dishes.
34 EN