Table of Contents
Advertisement
Using the Network Utility (Continued)
Notes
•
It may not be possible to transmit the images from movie player or other video applications.
•
When using "Update automatically", the transmitted image refresh rate depends on the
performance of the computer you are using and the surrounding radio wave environment.
•
The projector screen may have a few differences from the computer screen.
•
If you selected application window in step
image may not be correctly displayed by the projector.
•
The projector ID is the MAC address of the wired LAN inserted into the projector.
•
Playing contents protected by copyright is not supported.
•
To transmit sound, press the
button then launch the application that plays the
contents including the sound. When you operate the projector using Windows Vista
"Switching audio play device" window will be displayed after pressing the start button
of Network Utility. Follow the instruction to switch the audio play device, and then launch
the application that plays the contents including sounds.
•
If no sound can be heard from the computer though the connection is stopped, re-
launch the application that plays the contents including the sound.
•
Transmission may not be available depending on the sound type.
•
Sound cannot be transmitted if multiple projectors are selected.
•
The audio signals transmitted by a computer become mono.
•
Network Mouse Controller function may not work properly depending on the network
condition.
■
Displaying a JPEG image saved on a computer via the
projector
Launch the Network Utility software
1
application.
The Screen Image transmission mode window
appears on the computer's screen.
Click on the JPEG File icon
2
The Network Utility window changes to JPEG File
transmission mode.
Click on the Browse button, and
3
select the fi le to send.
Clicking on the Browse button displays the Open
dialog box. Select the fi le to send, then click on the
Open button.
The selected fi le is added to the pull-down list in
the Network Utility's Transmission File fi eld.
4
, if that application is not active (in use), the
.
64
4
Select the fi le to be sent from the
pull-down list of the Transmission
File fi eld.
Click on the Transmission File fi eld's
to display the pull-down list. Select the fi le to be
sent from this list.
A thumbnail of the selected fi le appears in the
Preview box. The fi le displayed here will be
transmitted.
®
,
3
Step
can be skipped.
The way that drag and drop the fi le to be sent from the desktop or Windows Explorer
into the Preview box is also available. In this case as well, the selected fi le is added to
the fi le pull-down list Transmission File fi eld's.
5
Select the projector to be
transmitted.
The IDs of projectors accessible for transmission
will be listed. (If projector name has been set
up already, it is shown instead of the MAC
address.) Select the checkbox of the projector
to be transmitted to from this list. Then icon
is displayed on the projector's screen for few
seconds.
It is possible to select up-to four projectors.
Click on the
6
The selected fi le's image is displayed by the projector.
Notes
•
Only one fi le can be sent at a time. To send another fi le, repeat steps
•
Selecting a fi le by drag and drop may not be available with Windows Vista
■
Displaying a video fi le saved on a
computer via the projector
1
Launch the Network Utility
software application.
The Screen Image transmission mode window
appears on the computer's screen.
2
Click on the
The Network Utility window changes to Movie
File transmission mode.
button
button.
icon.
65
4
6
and
.
®
.
Advertisement
Table of Contents
