Sharp Aquos SHV38 Series Basic Manual page 8

au Nano IC Card
04 tray slot
E
Close the au Nano IC Card 04/microSD memory card cover.
◎ Inserting the au Nano IC Card 04 tray not deeply enough may prevent the
product from functioning properly.
◎ Take care not to lose or damage the removed au Nano IC Card 04 tray.
Removing the au Nano IC Card 04
Before removing the au Nano IC Card 04, turn the product off.
A
Open the au Nano IC Card 04/microSD memory card cover
(zP.6).
B
Slowly pull the au Nano IC Card 04 tray straight out by
hooking a finger on it.
C
Remove the au Nano IC Card 04 from the au Nano IC Card
04 tray.
D
Slowly insert the au Nano IC Card 04 tray into the au Nano
IC Card 04 tray slot, taking care not to let the tray be
caught on the metal parts on both sides of the slot.
Confirm the position of the au Nano IC Card 04 tray slot and the orientation
of the au Nano IC Card 04 tray carefully, and insert the tray all the way into
the slot in the direction of the arrow. Inserting the tray forcibly may
damage the tray.
au Nano IC Card
04 tray slot
E
Close the au Nano IC Card 04/microSD memory card cover.
au Nano IC Card 04 tray
Metal parts
Metal parts
7