Sharp Aquos SHV38 Series Basic Manual page 7

Using the au Nano IC Card 04
au Nano IC Card 04
The au Nano IC Card 04 records your personal information such as phone
numbers.
This product supports au Nano IC Card 04.
◎ Make sure to unplug the microUSB plug of the common AC adapter 05
(sold separately) etc. from the product when attaching or removing the au
Nano IC Card 04.
Attaching the au Nano IC Card 04
Before attaching the au Nano IC Card 04, turn the product off.
A
Open the au Nano IC Card 04/microSD memory card cover.
Hook the tip of a finger into the slot and pull out it forward (A), and then
rotate it in the direction of the arrow to open (B).
Slot
B
Slowly pull the au Nano IC Card 04 tray straight out by
hooking a finger on it.
C
Put the au Nano IC Card 04 on the au Nano IC Card 04 tray.
Make sure the notches on the au Nano IC Card 04 and au Nano IC Card
04 tray face the proper orientation and put the card slowly on the tray.
D
Slowly insert the au Nano IC Card 04 tray into the au Nano
IC Card 04 tray slot, taking care not to let the tray be
caught on the metal parts on both sides of the slot.
Confirm the position of the au Nano IC Card 04 tray slot and the orientation
of the au Nano IC Card 04 tray carefully, and insert the tray all the way into
the slot in the direction of the arrow. Inserting the tray forcibly may
damage the tray.
au Nano IC Card 04
IC (metal) part
Front
au Nano IC Card 04 tray
IC (metal) part up
Notches
Back
au Nano IC Card 04
au Nano IC Card 04 tray
6