Cobalt Digital Inc BBG-1040-ACO Product Manual page 78

3
Table 3-2 BBG-1040-ACO Function Menu List — continued
Independent rows are present for each of the program path 16 embedded audio channels. Log, Alarm, Severity and Duration/
Last Occurrence controls and status function as described in Video (p. 3-51).
Independent rows are present for both program paths. Log, Alarm, Severity and Duration/Last Occurrence controls and status
function as described in Video (p. 3-51).
3-52
Audio sub-tabs independently show for all 16 embedded channels (per path) any missing audio
(whether absent due to low level, mute or unlocked status).
Note: • Audio screened is the audio associated with the selected card SDI program inputs.
• Path 1 Audio sub-tab is shown. An identical control sub-tab is present for Path 2 Audio (not
shown here).
Unused audio channels should, at the minimum, have Severity set to Ignore/OK. If this is
not done, nuisance alarms may occur.
Ancillary Data sub-tab independently shows loss of closed captioning packet presence for both
program video paths.
Note: • Closed captioning screened are the CC packet presence associated with the selected card SDI
program inputs.
• Ancillary data condition detection is functional only for CEA608/708 packet-based closed
captioning. This feature does not function for SD line 21 "waveform-based" closed captioning.
BBG-1040-ACO PRODUCT MANUAL
BBG-1040-ACO Function Menu List and Descriptions
(continued)
BBG1040ACO-OM (V1.4)