LG DP9911P Owner's Manual page 16

Audio/Video Connection
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment for audio
output.
You must set the AV IN/DVD switch to the "DVD" mode
OPTICAL
DIGITAL INPUT
16
R L
AUDIO INPUT
OR
Amplifier equipped with 2-channel analog stereo or Dolby
Pro Logic ll / Pro Logic: Connect the AUDIO OUT jacks on
the DVD player to the audio left and right IN jacks on your
amplifier, receiver, or stereo system, using the audio cables.
Amplifier equipped with 2-channel digital stereo (PCM) or
audio / video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS): Connect one of
the DVD Player's DIGITAL AUDIO OUT jack to the corresponding
in jack on your amplifier. Use an optional digital audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best sound
quality. For this you need a multi-channel audio / video
receiver that supports one or more of the audio formats sup-
ported by your DVD player such as MPEG 2, Dolby Digital and
DTS. Check the receiver manual and the logos on the front of
the receiver.
NOTES
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a strong,
distorted sound or no sound at all.
• Six Channel Digital Surround Sound via a digital connection
can only be obtained if your receiver is equipped with a
Digital Multi-channel decoder.
• To see the audio format of the current DVD in the on-screen
display, press AUDIO.