Table of Contents
Advertisement
NOTE
•
The display may look the same for [Full Wide], [Original] options at the recommended resolution
(3840 x 1600).
•
There is no [Cinema 1], [Cinema 2] menu on [FreeSync] mode.
Go to [Picture] [Game Adjust] [FreeSync], to set [FreeSync] on or off.
[Settings]
[Input]
[PBP]
•
[PBP]: Displays the screens of two input modes on one monitor.
•
[Input List]: Displays the screens of main input and sub input.
- [Main Input List] / [Sub Input List]: Please refer to the table below for possible PBP combinations.
PBP Connection
HDMI
Main Screen (Left)
USB-C
PC
22
Sub Screen (Right)
HDMI
USB-C
PC
-
O
O
O
-
O
O
O
-
[Picture]
[Settings]
[Picture]
[Picture Mode]
•
[Custom]: Allows the user to adjust each element. The color mode of the main menu can be adjusted.
•
[Vivid]: Optimizes the screen for the retail environment by enhancing the contrast, brightness, and sharpness.
•
[HDR Effect]: Optimizes the screen for high dynamic range.
•
[Reader]: Optimizes the screen for reading documents. You can brighten the screen in the OSD menu.
•
[Cinema]: Optimizes the screen to improve the visual effects of a video.
•
[FPS]: This mode is optimized for FPS games.
•
[RTS]: This mode is optimized for RTS Game.
•
[Color Weakness]: This mode is for users who cannot distinguish between red and green. It enables users with
color weakness to easily distinguish between the two colors.
NOTE
•
The [Picture Mode] that can be set depends on the Input signal.
•
If the [Picture Mode] is changed in the USB-C input, the screen may flicker or the resolution of your PC screen
may be affected.
Advertisement
Table of Contents
