Product Features; Setup; Installing The Tilt/Swivel Stand - Daewoo Lucoms C940DF User Manual

PRODUCT FEATURES

•
The convenient and user-friendly on-screen display allows for
easy and accurate adjustments of horizontal and vertical screen
size and position, geometry, and screen color.
•
The monitor complies with the VESA Display Data Channel
(DDC) specification for Plug and Play compatibility. Advanced
microcircuitry makes setup and configuration fast and effortless.
•
The monitor features Advanced Color Controls for fine-tuning to
meet your own personal tastes or application requirements. Use
the on-screen controls to adjust the color temperature, RGB gain
value for the best possible screen color and intensity.
•
Press the menu button and activate the Self-Diagnosis menu to
determine whether your monitor is functioning normally, not
receiving a signal or is receiving a signal that is out of scanning
range.
•
Activate the higher refresh rates of the monitor to stabilize the
screen and eliminate the annoying flicker that contributes to eye-
strain and headaches.
•
The "borderless" full-screen display capability works under all
graphic modes and provides a larger viewing area than
conventional monitors, giving you a better picture with more
workspace.
•
The monitor 940DF/940DFBK which has applied the Flat CDT
offers creating sharper and cleaner images even at the outer most
edges of the screen.
•
With the POWER LIGHT function added,you can enjoy the
bright screen for movie or any other multimedia utilization.
English - 2

SETUP

INSTALLING THE TILT/SWIVEL STAND

1. Ensure that the power is off to the monitor.
2. Set the monitor face down with the underside facing you. Please be
careful not to scratch the monitor screen.
3. Align the hooks on the stand with the guide holes on the bottom chassis
of the monitor.
4. Insert the hooks into the guide holes.
5. Slide the tilt/swivel stand toward the front of the monitor until the latch
locks in position.
6. Turn the monitor and the stand upright.
If you want to remove the tilt/swivel stand on the monitor, press
the latch and pull the tilt/swivel stand toward the back of the
monitor. Lift the stand to separate.
English - 3
Latch