Maintenance - RIDGID STEALTH FORCE R86036 Operator's Manual

OPERATION
CAUTION:
Hold the tool securely. Expect the tool to move
when the switch trigger is depressed due to
reaction forces. Failure to do so could cause loss
of control and injury to user.
NOTICE:
The impact driver is not designed to be used as
a drill.
 Check the direction of rotation selector for the correct
setting (forward or reverse).
 Hold the impact driver with one hand.
 Place the bit on the screw head, bolt head, or nut and
slowly depress the switch trigger. Start the bit slowly for
more control.

MAINTENANCE

WARNING:
When servicing, use only identical replacement
parts. Use of any other parts could create a hazard
or cause product damage.
NOTE: Illustrations start on page 9 after French and Spanish
This product has a 90-Day Satisfaction Guarantee Policy, as well
as a Three-year Limited Warranty. For Warranty and Policy details,
please go to www.RIDGID.com or call (toll free) 1-866-539-1710.
 As the screw, bolt, or nut is driven, impacting will begin.
NOTE: Periodic cool down times are necessary during
extended use or when there is a reduction in torque out-
put.
NOTICE:
Make sure the air vents on the tool are free
from obstruction. Failure to do so may produce
excessive heat and damage the tool.
ELECTRIC BRAKE
The electric brake will stop the bit rotation after the operator
releases the switch trigger.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
language sections.
7 - English