Lenovo 20W000QQGE Hardware Maintenance Manual page 68

System board connectors and cables (for AMD models)
Table 12. System board connector and cable guide
Item Connector (location)
Camera/Hall sensor/LED
1
connector (internal)
Power button board connector
2
(internal)
3
Ethernet card connector (internal)
Speaker assembly connector
4
(internal)
5
Wireless-LAN-card slot (internal)
6
LCD connector (internal)
62
T14 Gen 2 and P14s Gen 2 Hardware Maintenance Manual
Internal cable required
Camera/Hall sensor/LED cable
Power button board cable
Ethernet card cable
Speaker assembly cable
No
LCD cable
Cable connection
Connect one end of the cable to
the camera/mic combo board, hall
sensor, and LED and the other end
to this connector.
The power button board comes
with a cable. Connect the cable to
this connector.
Connect one end of the Ethernet
card cable to the Ethernet card
and the other end to this
connector.
The speaker assembly comes with
cable. Connect the cable to this
connector.
Insert the wireless LAN card into
this slot.
Connect one end of the LCD cable
to the LCD panel and the other end
to this connector.