Texas Instruments bq24195/L User Manual page 19

www.ti.com
-001 -002 RefDes
1 0 U1
0 1 U1
1 1 --
1 1 --
4 4 -
Notes: 1. These assemblies are ESD sensitive, observe ESD precautions.
2. These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.
5. Install label after final wash. Text shall be 8 pt font. Text shall be per Label Information.
6. Install after final wash.
Label Information
Assembly number
PWR193-001
PWR193-002
SLUUA18 – October 2012
Submit Documentation Feedback
Table 5. Bill of Materials (continued)
Value Description
BQ24195LRGE IC, I2C Controlled 2.5A Single Cell USB /
Adaptor Charger With Narrow VDC Power Path
Management and USB OTG
BQ24195RGE
2
IC, I C controlled 2.5-A single cell USB/adaptor
charger with narrow VDC power-path
management and USB OTG
PCB
Label (See note 5)
SJ-5303 Rubber foot (see note 6)
Text
bq24195LEVM-021
bq24195EVM-021
Copyright © 2012, Texas Instruments Incorporated
Board Layout, Schematic, and Bill of Materials
Size Part
Number
QFN-23 BQ24195LRGE
QFN-24 BQ24195RGE
3 in × 3 in × 0.031 PWR193
in
1.25 × 0.25 in THT-13-457-10
0.044 × 0.20 in SJ-5303
bq24195/L EVM (PWR193) User's Guide
MFR
TI
TI
Any
Brady
3M
19