Wireless Flash Shooting: Radio (2.4G) Transmission; Wireless Settings; Setting The Communication Channel; Setting The Communication Group - Godox WITSTRO AD400Pro Quick Start Manual

Wireless Flash Shooting: Radio (2.4G) Transmission

AD400Pro adopts Godox 2.4G wireless X system, which has good compatibility with other products of our
company.
As a slave unit, AD400Pro is automatically compatible with Canon E-TTL II, Nikon i-TTL, Sony, Olympus, Panasonic
and FUJIFILM system according to the master unit.
*As a slave unit, AD400Pro can be controlled by the following master units: XPro series, X1T series, AD360II series,
V860II series, V350 series,TT685 series,TT600 series, TT350 series, etc.
TTL
1
CH
A
+0.3
10
%

1. Wireless Settings

Press < > Wireless Setting Button again until <
CH
MODE GR/CH
A
MENU
10
%

2. Setting the Communication Channel

If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The
channel IDs of the master unit and the slave unit(s) must be set to the same.
MODE GR/CH 32
CH
A
MENU
10
%
1 2
Long press the <GR/CH> Turn the Select Dial to choose a
Button for 2 seconds so that channel ID from 1 to 32.
channels ID is displayed on
the LCD panel.
C.Fn
Ver
0.6
LCD
ID 99
4
RESET
> is displayed on the panel.
TTL
1
+0.3
10
%
MENU
TTL
+0.3
10
%
10
%
3
Press the <SET> button to
confirm.
Wireless ID setting: press the MENU button to enter C.Fn-ID and
choose from 01 to 99 (Note: this can only be achieved when the master
unit also has this function).
- 37 -
Wireless Flash Shooting: Radio (2.4G) Transmission

3. Setting the Communication Group

Short press the < GR/CH > Button to choose group ID from A to E.
MODE
MENU
10
%

4. Wireless Flash Shooting

Positioning and Operation Range (Example of wireless flash shooting)
● Autoflash Shooting with One Slave Unit
● Use master unit with wireless transmitting function as the transmitter end.
●
Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on the conditions such as positioning of slave units, the
surrounding environment and whether conditions.
MODE GR/CH
MENU
Multi
1
CH
GR/CH
E 256
1/
5 - 5
Hz
Transmission distance is about 100m
- 38 -
OFF