Included Accessories; Separately Sold Accessories; Replacing Adapter Rings And Accessories; Attaching Flash Tube - Godox WITSTRO AD400Pro Quick Start Manual

Name of Parts
LCD Panel:
(2) M Manual Flash
A
1/10100
t.1
Flash duration
(3) Multi Flash
A
(4) Radio Transmission Shooting
1
CH
Channel
A
Firing group
(4) Optical transmission wireless shooting
A

Included Accessories

1. Flash tube 2. Lithium battery pack 3.Battery charger
6.Bowens-mount adapter ring 7.Wrench 8. Portable Bag
3
1 2
M: Manual
M
256
Manual flash output
1/
10
%
Multi
Multi:Stroboscopic flash
256
1/
Flash frequency
5 - 5
Hz
OFF
Number of flashes
: Radio transmission
wireless shooting
Multi
256
1/
5 - 5
Hz
OFF
M
S2
S1/S2
256
1/
OFF
4. Power cord 5. Standard Reflector
9. Instruction manual
7
4 5 6 8
- 29 -
Name of Parts

Separately Sold Accessories

flash
The product can be used in combination with the following accessories sold separately, so as to achieve best
photography effects: Xpro & X1 Wireless Flash Trigger, Softbox, Beauty Dish, Fold up Umbrella, Snoots,
Light Stand, etc.

Replacing Adapter Rings and Accessories

1. Remove the reflector or other
accessories from the flash head.
4. Tighten the two screws and use
another two screws provided to fix.

Attaching Flash Tube

1. Remove the reflector or other
accessories from the flash head.
5
● Note: To avoid damage, please detach the flash tube during the transportation.
2. Loosen the two Mount Fixing Screws. 3. Match the Accessory Locking Ring of
Bowens-mount or other mount
adapter ring to the Accessory Locking
Ring of the flash and push it in.
5. Install the Bowens-mount
6. If needed to use new Godox-mount
accessories or other corresponding accessories after installing the adapter ring
of other brand, please split the reflector
accessories.
and insert it into the new Godox mount to
install the required accessories(How to
detach the standard reflector: hold the two
ends and detach it.). Or install the new
Godox-mount softbox directly (except for
Profoto-mount adapter ring).
2. Match the flash tube in the Tube
Socket. Push the flash tube in until it
is securely seated into the socket.
- 30 -