Page 2
When using Godox 2.4G wireless X system off camera, AD600pro can be triggered by XPro and X1 Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual series flash trigger in TTL/M/Multi mode, etc.
Contents Foreword Warning Name of Parts Body Control Panel LCD Panel Included Accessories Separately Sold Accessories Installing Reflector (Other Accessories) Attaching Flash Tube Adjusting Handle Battery Power Management Wireless Flash Mode Flash Mode— TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync Flash Mode—M: Manual Flash Stable Color Temperature Function Flash Mode—Multi/Stroboscopic Flash...
Name of Parts Name of Parts Body: Body: Body: Fan Outlet < > Wireless <MODE> Mode Selection Button Selection Button <GR/CH> Group/Channel Button Fan Inlet Handle Fixed Part <MENU> Menu Button Direction Adjusting Handle Select Dial <SET>Set Button < H>High Speed Sync Button <...
Name of Parts Name of Parts LCD Panel: M: Manual flash Separately Sold Accessories (2) M Manual Flash The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: Xpro & X1 Wireless Flash Trigger, FT-16 Remote Control, Softbox, Beauty Dish, Fold up Umbrella Snoots, Light Manual flash output Stand, etc.
Battery Battery Features Battery Level Indication 1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are Attach the battery pack to the flash correctly. Be aware of the battery level by check the battery level indication on over 300.
Flash Mode — M: Manual Flash Flash Mode — TTL Autoflash This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the The flash output is adjustable from 1/1 full power to 1/256th power in 1/3rd stop increments. To obtain a correct flash will work together to calculate the correct exposure for the subject and the background.
Flash Mode — M: Manual Flash Flash Mode — Multi: Stroboscopic Flash Display Flash Duration With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the Flash duration refers to the length of time that from flash’s firing to reach the half peak at maximum.
Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Flash Shooting: Radio (2.4G) Transmission AD600Pro adopts Godox 2.4G wireless X system, which has good compatibility with other products of our 3. Setting the Communication Group company. Short press the < GR/CH > Button to choose group ID from A to E.
M mode ALT: UNITS sets the total Triggering times The Reason & Solution of Not Triggering in Godox 2.4G Wireless number of flashes; ALT sets the M mode 1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base station, 2.4G wifi router, triggering times before flash’s firing...
Modeling Lamp Protection Function Modeling Lamp 1. Over-Temperature Protection AD600Pro is equipped with a 38W LED modeling lamp which has two continuous lighting modes. ● To avoid overheating and deteriorating the flash head, do not fire more than 75 continuous flashes in fast •...
Type-C USB line. Flash Duration Indication √ ● As the firmware upgrade needs the support of Godox G2 software, please download and install the "Godox G2 Display Dot-matrix panel firmware upgrade software" before upgrading. Then, choose the related firware file.
Need help?
Do you have a question about the Witstro AD600Pro and is the answer not in the manual?
Questions and answers