Table of Contents
Advertisement
DTV setup
Available for setting power supply for the aerial, and upgrading the tuner software,
etc.
1
2
3
4
To the previous
5
screen
Exit
6
26
Switch to digital channels
Display the menu bar
Select "DTV"
1 select
DTV
2next
Select "Setup"
1 select
DTV Menu
Timer
Edit PR
Configuration
Setup
Installation
2 next
Select an item
select
Setup
14:00
05/05/2006
Digital Audio Output
PCM
Banner Duration
2 sec
Receiver Upgrade
Auto
Common Interface
No CI Module
Antenna Power
Off
Finish
Output the
PCM
Dolby Digital
signal
Digital Audio Output
Read '"Dolby Digital" output from the "DIGITAL AUDIO OUT" terminal' (P. 33) before setting.
You can upgrade the tuner software as newer versions become available. Normally set to "Auto".
Auto
When JVC or the broadcasting station informs you of the new software, download it as follows.
1 Select "Manual"
Upgrade
tuner
Manual
Receiver Upgrade
Enter PIN code if needed.
3 Select "Yes"
New software found.
Would you like to upgrade now?
Yes
In standby
No
If the TV has upgrade to the latest tuner software, the message "Search completed. No new software found
Select "In standby" instead of "Yes" if you want to upgrade the software automatically when the TV is turned off.
To watch pay-TV digital channels, use the Conditional Access Module menu.
This function can only be used when pay-TV can be received in your region.
Set
No CI Module
Conditional
Access
Module
1 Press "OK" button to display the
Conditional Access Module menu
Common Interface
The content of the menu is different depending on the broadcasting company.
For details, consult your broadcasting company
Power
supply for
Off
the indoor
aerial
Read "Power supply for the indoor aerial" (P. 33) before setting.
Antenna Power
Banner Duration: Select the display time for channel information (2 sec / 5 sec / 8 sec).
PCM
Dolby Digital
: The Linear PCM
: The Dolby Digital signal is output
signal is output
Only when the Dolby Digital signal is received
Auto
Manual
: Automatically download and
: Manually download and install software
install software upgrades
upgrades
This occurs at midnight when
When you change the setting, enter
the TV's power is off.
PIN code.
2 Select "Search for new"
1 select
Software Version
3.07.00
OK
Search for new
2 next
If upgrading is not necessary,
select "OK" to finish.
1 select
"Software upgraded
Downloading new software
successfully! TV will
now reset!".
Cancel
2 next
When the Conditional Access Module etc. is
No CI Module
inserted after subscribing to the broadcasting
: Function is not
company, this function is available.
available
TV digital channels" (P. 7)
2 Follow the instructions on the
screen to set up pay-TV
Off
On
: Power not
: Power supplied
supplied
1 select
2 start
"
will appear.
"Watch pay-
Advertisement
Table of Contents
