Advertisement
Installation
3
Insert the surge protector into the desktop's grommet hole.
4
Plug the surge protector's power cord into a standard, 3-wire grounded 120V
AC outlet.
5
Pull the unit out of the grommet completely
down onto the desktop
TLP310DMUSB
6
Connect equipment to the surge protector's AC outlets, USB charging ports
and RJ45 Ethernet port (TLP310DMUSB only).
7
When not in use, disconnect equipment, pull the surge protector up to a
straight, vertical position, then push the surge protector into the grommet
for unobstructed storage.
16-09-096-933648-EN.indd 3
.
B
(3-Outlet Model)
A
B
TLP410DMUSB model shown in illustration.
Product appearance will vary by model.
A
, then fold the surge protector
TLP410DMUSB
3
(4-Outlet Model)
A
B
9/21/2016 5:09:25 PM
Advertisement
