Advertisement
Quick Links
Owner's Manual
Desktop Grommet
Surge Protector with
3-Outlet Model: TLP310DMUSB
4-Outlet Model: TLP410DMUSB
Important Safety Instructions
Installation
Product Registration
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved. Protect It!
16-09-096-933648-EN.indd 1
Protect It!
USB Charging
2
2
4
®
Lifetime Limited Warranty
Ultimate Lifetime
Insurance Policy
is a registered trademark of Tripp Lite.
®
1
4
4
9/21/2016 5:09:21 PM
Advertisement
Related Manuals for Tripp Lite Protect It! TLP310DMUSB
Summary of Contents for Tripp Lite Protect It! TLP310DMUSB
- Page 1 ISOBAR6ULTRA surge protector— a $100 value! www.tripplite.com/warranty 1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support Copyright © 2016 Tripp Lite. All rights reserved. Protect It! is a registered trademark of Tripp Lite. ® 16-09-096-933648-EN.indd 1 9/21/2016 5:09:21 PM...
- Page 2 Important Safety Instructions SAVE THESE INSTRUCTIONS CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords or adapters. This surge protector is designed for indoor use only. Install the surge protector away from heat-emitting appliances such as radiators or heat registers. Do not install where excessive moisture is present.
- Page 3 Installation Insert the surge protector into the desktop’s grommet hole. TLP410DMUSB model shown in illustration. Product appearance will vary by model. Plug the surge protector’s power cord into a standard, 3-wire grounded 120V AC outlet. Pull the unit out of the grommet completely , then fold the surge protector down onto the desktop TLP310DMUSB...
- Page 4 The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system. The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.