Download Print this page

Campania International Chatsworth FT-141 Assembly Instructions

Download this manual

Fountain Components

Image

Item Description

Chatsworth

Fountain Finial

Chatsworth

Fountain Base

Fountain Information:

• This fountain holds approximately 2 gallons of water.

• This fountain uses a small fountain cover: FTNCOV-SM

• No refill device or submersible lights are suggested for this fountain.

Pump Information:

PES120 - 120 GPH Pump (5 ft. cord length)

Tools Required:

Bubble Level

Screwdriver

Component

Quantity

Item #

FT-141A

FT-141B

FT-141 Chatsworth Fountain

Assembly Instructions

Pump Kit Parts List

Image

PK120 Pump

Approx. 6" length of 1/2" black

non-kink tubing

Approx. 1" length of 5/8" clear tubing

1" length of 1/2" CPVC Pipe

Hose Clamps

Proudly

MADE IN USA

Component

Quantity

#7 Stopper

rev 4/28/2020

Page 1 FT-141 Chatsworth Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 2 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • No refill device or submersible lights are suggested for this fountain. Pump Information: PES120 - 120 GPH Pump (5 ft. cord length) Tools Required: Bubble Level Screwdriver...
Page 2 FT-141 Chatsworth Fountain Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.