RF wireless devices. Sepura products are designed for use by mobile workforces, often working alone, and are intended for use in occupational Some electronic devices are sensitive to RF energy. POWER OFF and controlled conditions.
Page 5
1.2m to any person. This distance has been calculated based on a 2dB cable loss between radio and antenna. Accessories Sepura products have been tested to meet strict guidelines for personal safety and operational conditions. Only accessories approved by Sepura are recommended for use with this product.
Please dispose of your waste product according to your national and local regulations. Contact your service IC radiation exposure statement provider or Sepura for information about disposing of this This radio is intended for use in occupational/controlled product in your region of the world.
Page 7
The antenna should be installed and operated with a minimum distance of 1.2m to any person. Cette radio a été conçue pour un usage professionnel dans un environnement contrôlé, où les utilisateurs sont pleinement conscients du danger potentiel de l’exposition à laquelle ils sont soumis et peuvent exercer un contrôle sur cette exposition.
Page 8
DMR Mobile Radio SBM8000, SCM8000, SEM8000...
Connectors, controls, buttons and keys Refer to the illustration for the location of the following connectors, controls, buttons and keys: (1) Volume control knob (2) Microphone/programming cable interface connector (3) Left context key (4) Up navigation key (5) Down navigation key (6) Right context key (7) Power button (8) LED...
Status indicators and icons Icon Description Status indicators show the operational state of your radio. Icons GPS feature is available but the radio does not appear on your radio display when you perform certain have valid location information. activities or activate certain features. Signal and security icons General icons Icon...
LED status indicators Icon Description The LEDs change colour to show the operational status of your Channel Scanning radio. Scanning is in process when the icon rotates. LED colour Operational State Scanning stops on a priority channel when the centre triangle is red. Scanning stops on a non- Solid red In use and transmitting.
Sepura supply a range of accessories for this product. Contact Power On/Off your service provider or visit the Sepura website for a full list of To power on, press and hold the Power button. accessories suitable for use with this product.
Call a group or person from the contact list Emergency alarm Press the right context key to activate the Contacts menu. Your radio may not be programmed for an Emergency alarm. If Select the Contacts List option and then press the left context an alarm is programmed it may not sound an audible alert.
Caring for your radio Your radio does not require regular servicing. Caring for your radio as described in this guide will help maintain the product in good operational condition. Always wear eye protection when using brushes or other tools to remove debris from connectors or other parts of the radio or microphone.
Page 15
Sepura plc Radio House St Andrew's Road Cambridge CB4 1GR sepura.com Tel: +44 (0)1223 876000 Fax: +44 (0)1223 879000...
Need help?
Do you have a question about the SEM8010H and is the answer not in the manual?
Questions and answers