Replacing The Led Lamp - GE PVM9225 Owner's Manual

Replacing the LED Lamp

Cooktop Light/Nite Light
Replace with LED lamp. See back cover for ordering
online at GEAppliances.com.
1. To replace the cooktop light/nite light, first disconnect
the power at the main fuse or circuit breaker panel,
or pull the plug.
2. Remove the screw from the side of the light
compartment cover and lower the cover until it stops.
3. Be sure the LED lamp is cool before removing.
Remove a screw and connector from LED lamp.
4. Connect LED lamp and secure using the screw. Raise
the light cover and replace the screw. Connect
electrical power to the oven.
49-7000156 Rev. 0
Remove screw.
21