Table of Contents
Advertisement
Menu SettingS
DtV Setup
(in Digital tV Mode only)
● record : (Refer to p.34)
● configuration: (Refer to p.44)
● edit channels: (Refer to p.33)
● installation:
- Auto Search / Manual Search: (Refer to p.32)
- Software update: (Refer to p.46)
- Default Setting: (for Digital TV Mode Only)
Sets the current all settings of the Digital TV mode to the default
settings.
note:
▪
Please note that once you perform the Default Setting, all data such
as digital channel list, and user configured data are deleted. But, no
information on your HDD will be removed.
▪
After completing the default setting, the installation wizard for digital
channels will appear automatically in a few seconds.
▪
For more information about Default Setting of the analog channels,
refer to p.7.
● System
-
Status: You can view system information.
-
Signal Detection: You can view the signal strength and signal
quality of the channel that is currently on air.
-
common interface: You can view the current status of the CI Module (Conditional Access Module).
note: The displayed information about a Common Interface may differ depending on Common Interface type
:
> DtV Setup
> D t V S e t u p
Move
DT V Setup
Enter
Record
Configurations
Edit Channels
Installation
System
GB-9
Advertisement
Table of Contents
