Table of Contents
Advertisement
TV
Audio
(red/white cables)
DVD player (rear)
TV OUT
Y
HDMI OUT
COMPONENT VIDEO OUT
Step 1: Connecting to
television
This connection enables you to view the
video playback from this unit. You only
need to choose one of the options below
to make the video connection.
– For a standard TV, follow option
– For a progressive scan TV, follow
option 2.
– For a HDMI TV, follow option 3.
– For TV with only a single antenna
input jack, follow option 4.
Option 1: Using Composite Video
jacks (CVBS)
You can connect this unit to a TV
through the composite video cable which
provides good picture quality.
Connect the audio/video cables (supplied)
from the TV OUT and AUDIO OUT
L/R jacks on this unit to the video input
jack (yellow) and audio input jacks (red/
white) on your TV.
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO
V (Pr/Cr)
IN
U (Pb/Cb)
VIDEO IN
Y
Video
(yellow cable)
DIGITAL
Pb
OUT
Pr
COAXIAL
AUDIO OUT
1.
Basic Connections
COMPONENT
VIDEO IN
TV
1
Video
TV OUT
Y
HDMI OUT
COMPONENT VIDEO OUT
Option 2: Using Component Video
jacks (Y Pb Pr)
You can connect this unit to a TV
through the component video cables
which provides superior picture quality.
The progressive scan video quality is only
available when using Y Pb Pr connection
and a progressive scan TV is required.
A
Connect the component video cables
(red/blue/green - not supplied) from the
Y Pb Pr jacks on this unit to the
corresponding component video input
jacks (or labeled as Y Pb/Cb Pr/Cr or
YUV) on your TV.
B
Connect the audio/video cable (red/white
- supplied) from the AUDIO OUT L/R
jacks on this unit to the audio input jacks
(red/white) on your TV. Leave the yellow
video cable disconnected.
C
Proceed to 'Getting Started - Setting up
Progressive Scan feature' for detailed
progressive feature setup.
S-VIDEO
IN
AUDIO
IN
VIDEO IN
2
Audio
(red/white cables)
DIGITAL
Pb
OUT
Pr
COAXIAL
AUDIO OUT
13
Hide quick links:
Advertisement
Table of Contents
