Panasonic LUMIX DC-GF10K Basic Operating Instructions Manual page 70

Digital camera/ lens kit/double zoom lens kit
Table of Contents

Advertisement

Others
Multiple pictures are taken at one time.
• Is the drive mode set to a mode other than [Single]? (P44)
• Are you using the bracket function? (P45)
Sometimes it is difficult to focus with Auto Focus when recording 4K
motion pictures.
• This phenomenon occurs when the camera is trying to record with highly accurate focus
at a reduced Auto Focus speed, and is not a malfunction.
The flash is not activated.
• When the electronic shutter is used, the flash is not activated.
• When [Silent Mode] is set to [ON], the flash is not activated.
The picture is not played back.
There are no recorded pictures.
• Is the card inserted?
• Is this a folder or picture which was processed in the PC?
If it is, it cannot be played back by this unit.
> It is recommended to use the software "PHOTOfunSTUDIO" (P64) to write pictures
from PC to card.
• Has [Playback Mode] been set for playback?
> Change to [Normal Play].
A Wi-Fi connection cannot be established.
Radio waves get disconnected.
Wireless access point is not displayed.
∫ General tips for using a Wi-Fi connection
• Use within the communication range of the device to be connected.
• Is any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz
frequency operated nearby?
> Radio waves may get interrupted when used simultaneously. Use them sufficiently
away from the device.
• When the battery indicator is flashing red, the connection with other equipment may not
start or the connection may be disrupted.
(A message such as [Communication error] is displayed.)
• If you place the camera on a metal table or shelf, the radio waves may be adversely
affected. In such cases, you may not be able to establish a connection. Move the
camera away from the metal surface.
70
DVQX1493 (ENG)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dc-gf10wLumix dc-gf10kga

Table of Contents