Table of Contents
Advertisement
2
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
C Focus indication
• Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)
• Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)
3
Press the shutter button fully (push it in
further), and take the picture.
• Be careful not to move the camera when you press the shutter button.
• When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].
10
Check the picture you have taken
• The [Auto Review] function displays the picture you have
just taken.
• To display the picture in Playback Mode, press [(].
Preparation/Basic "Quick Start Guide"
3.5
3.5
3.5
(P48)
(ENG) DVQX1493
60 60 60
1/98
1/98
1/98
1/98
21
Advertisement
Table of Contents
