Advertisement
Guide to Parts required versus measured size. (1mm graduations)
"x"
Anvil size spacer ring
34.5-35.5
35
no
35.5-36.5
35
1x1mm
36.5-37.5
35
1x2mm
37.5-38.5
38
no
38.5-39.5
38
1x1mm
39.5-40.5
38
1x2mm
40.5-41.5
41
no
41.5-42.5
41
1x1mm
42.5-43.5
41
1x2mm
43.5-44.5
44
no
44.5-45.5
44
1x1mm
45.5-46.5
44
1x2mm
46.5-47.5
47
no
47.5-48.5
47
1x1mm
48.5-49.5
47
1x2mm
49.5-50.5
50
no
50.5-51.5
50
1x1mm
51.5-52.5
50
1x2mm
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack sealey limited
0.5mm Approximately
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park,
Bury st. Edmunds, suffolk,
IP32 7Ar
Original Language Version
0.5mm Approximately
01284 757500
01284 703534
Enlarged copy of fig.3 for clarity
www.sealey.co.uk
sales@sealey.co.uk
dBG509
Issue: 1 - 21/06/15
Advertisement
