A FEW STEPS TO PERFECT PREPARATION
ON / OFF SWITCH
CONTROL PANEL
An innovative innovation is our illuminated touch control panel.
It can be started and operated by a simple finger touch. The illuminated display always shows you the
current application with the remaining time and the respective speed.
47
At the bottom right of the device is the ON /
OFF main switch. This must be activated if you
want to switch the device ON or OFF. The mains
plug can remain in the socket, so that the
device is completely switched off. In order to
reactivate the standby mode in the touch
display, the main switch must be switched on.
Please note that one of the two containers must
always be located on the motor base for
activation.
DE
KSB-200