1. Manuals
  2. Brands
  3. NemaVision-iPC Manuals
  4. Industrial PC
  5. NVHMI-707P
  6. User manual

NemaVision-iPC NV-HMI-707P User Manual

Hide thumbs Also See for NV-HMI-707P:
Table of Contents

Advertisement

Quick Links

Download this manual
NemaVision-iPC
NV-HMI-7XX
User Manual
Release Date
_
Revision
Oct. 2014
V1.6
1

Advertisement

Table of Contents
loading

Related Manuals for NemaVision-iPC NV-HMI-707P

Summary of Contents for NemaVision-iPC NV-HMI-707P

  • Page 1 NemaVision-iPC NV-HMI-7XX User Manual Release Date Revision Oct. 2014 V1.6...

  • Page 2: Warning!/Avertissement

    Warning!_____________________________ This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual, it may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.

  • Page 3: Packing List

    Packing List Accessories (as ticked) included in this package are: □ Adaptor □ Driver & manual CD disc □ Other.___________________(please specify) Safety Precautions Follow the messages below to prevent your systems from damage: ◆ Avoid your system from static electricity on all occasions. ◆...

  • Page 4: Table Of Contents

    Table of Contents___________________ Warning!/Avertissement!......…………………………….……..….2 Caution/Precaution……………..……………………………………………………2 Packing List…………………………………………………………………………..3 Safety Precautions/Consignes de sécurité……….……………………………..3 Chapter 1 Getting Started 1.1 Specifications…………………………...…………………………..6 1.2 Dimensions………..………………………...…………………..9 1.3 Brief Description of NV-HMI Series…………………….………14 1.4 Installation of HDD (NV-HMI-707/NV-HMI-708)…..…………16 1.5 Installation of HDD (NV-HMI-710)…………………………….. 18 1.6 Installation of HDD (NV-HMI-712/NV-HMI-715)...…...………19 Chapter 2 Hardware 2.1 Mainboard………………..…………………..………………..…..21...
  • Page 5 5.2 Software Functions……………………………………………….88 5.2.1 Software Functions (Resistive Touch)........88 5.2.2 Software Functions (Projected Capacitive)……….……...….97 Figures Figure 1.1: Dimensions of NV-HMI-707…..………………..……...9 Figure 1.2: Dimensions of NV-HMI-708……..……….………..…..10 Figure 1.3: Dimensions of NV-HMI-710………………………..…..11 Figure 1.4: Dimensions of NV-HMI-712……………………..……12 Figure 1.5: Dimensions of NV-HMI-715……………………..…13 Figure 1.6: Front View of NV-HMI SERIES………………..…….14 Figure 1.7: Rear View of NV-HMI-707/NV-HMI-708……………..15 Figure 1.8: Rear View of NV-HMI-710……………………………...15 Figure 1.9: Rear View of NV-HMI-712/NV-HMI-715……………..15...

  • Page 6: Getting Started

    Chapter 1 Getting Started 1.1 Specifications NV-HMI NV-HMI NV-HMI NV-HMI NV-HMI -707(P) -708(P) -710(P) -712(P) -715(P) System Intel Atom Cedar View N2600 1.6GHz Dual Core Processors /Intel Atom D2550 1.8GHz (Optional for NV-HMI-712(P)/715(P) only) System Intel NM10 Chipset System Onboard DDR3 2GB 800 MHz Memory /4GB (Optional for NV-HMI-712(P)/715(P) only) IO Port...
  • Page 7 Lifetime Touch Screen Type Resistive Touch / Projected Capacitive Touch (for P model) Interface RS-232 / USB (for P model) Light 80% / 90% (for P model) Transmission Power Power Input 9~36V DC Mechanical Construction Sliver aluminum front bezel and chassis IP Rating IP65 front panel Mounting...

  • Page 9: Dimensions

    1.2 Dimensions Figure 1.1: Dimensions of NV-HMI-707...

  • Page 10: Figure 1.2: Dimensions Of Nv-Hmi-708

    Figure 1.2: Dimensions of NV-HMI-708...

  • Page 11: Figure 1.3: Dimensions Of Nv-Hmi-710

    Figure 1.3: Dimensions of NV-HMI-710...

  • Page 12: Figure 1.4: Dimensions Of Nv-Hmi-712

    Figure 1.4: Dimensions of NV-HMI-712...

  • Page 13: Figure 1.5: Dimensions Of Nv-Hmi-715

    Figure 1.5: Dimensions of NV-HMI-715...

  • Page 14: Brief Description Of Nv-Hmi Series

    1.3 Brief Description of NV-HMI Series There are 7”, 8”, 10.1”, 12.1”, 15”, Industrial Compact Size Panel PC in NV-HMI series, which comes with flat front panel touch screen and fanless design. It is powered by Intel Atom N2600 1.6GHz CPU built-in, 2GB DDR III 800 MHz, and now it also can be powered by Intel Atom D2550 1.8GHz CPU built-in, 4GB DDR III 800MHz optional for NV-HMI-712 and NV-HMI-715.

  • Page 15: Figure 1.7: Rear View Of Nv-Hmi-707/Nv-Hmi-708

    Figure 1.6: Rear View of NV-HMI -707/NV-HMI -708 Figure 1.7: Rear View of NV-HMI-710 Figure 1.8: Rear View of NV-HMI -712/ NV-HMI- 715...

  • Page 16: Installation Of Hdd (Nv-Hmi-707/Nv-Hmi-708)

    1.4 Installation of HDD (NV-HMI-707/NV-HMI-708) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 There is a SSD card in the bracket. Gently remove the screw, then carefully pull SSD card.
  • Page 17 Step 4. You can replace SSD card by unscrewing 4 screws as shown in the picture. Note: 4 screws are packed in the packing list. Step 5 There is a SD card hole in the side of the machine. You can replace SD card from there.

  • Page 18: Installation Of Hdd (Nv-Hmi-710)

    1.5 Installation of HDD (NV-HMI-710) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws. Step 2 Take the storage cover beside the Panel PC. Step 3 You can put or remove HDD into the machine by pulling the HDD bracket.

  • Page 19: Installation Of Hdd (Nv-Hmi-712/Nv-Hmi-715)

    Step 4. There is a SD hole in the side of machine. You can replace SD card from there. 1.6 Installation of HDD (NV-HMI-712/NV-HMI-715) Step 1 There are 2 screws to deal with when enclosing or removing the chassis. Gently remove 2 screws.
  • Page 20 Step 3 You can remove HDD by unscrewing 4 screws in the HDD bracket. Note: 4 screws are packed in the packing package. Step 4 There is a SD hole in the side of machine. You can replace SD card from there...

  • Page 21: Chapter 2 Hardware

    Chapter 2 Hardware 2.1 Mainboard Specifications 170mm x 113mm Board Size Intel Atom N2600 /1.60GHz (2cores,3.5W, onboard） CPU Support Intel Atom D2550 /1.86GHz(2cores,10W, option) Chipset Intel NM10 Express Memory Onboard 2GB DDRIII SDRAM Support (N2600) Onboard 4GB DDRIII SDRAM (D2550) Integrated Intel GMA 3600 (N2600) Graphics Integrated Intel GMA 3650...
  • Page 22 Digital I/O 8-bit digital I/O by Pin header (CN2) 4-bit digital Input 4-bit digital Output 4-bit digital I/O by Pin header (CN3) Support CR2477 Li battery by 2-pin header Battery 2-bit digital Input Audio Support Audio via Realtek ALC662 HD audio codec 2-bit digital Output Support Line-in, Line-out, MIC by 2x6-pin header 1 x PS2 keyboard/mouse by 1x6 box pin header (CN3)

  • Page 23: Figure 2.1: Mainboard Dimensions

    (units :mm) Figure 2.1: Mainboard Dimensions...

  • Page 24: Installations

    2.2 Introduction SBC-7106 is a 4" industrial motherboard developed on the basis of Intel Cedarview-M Processors and NM10, which provides abundant peripheral interfaces to meet the needs of different customers. Also, it features dual GbE ports, 3-COM ports and one Mini PCIE configuration,one VGA port, one HDMI port, one LVDS interface.

  • Page 25: Figure 2.3: Jumpers And Connectors Location_ Board Bottom

    Board Bottom Figure 2.3: Jumpers and Connectors Location_ Board Bottom...

  • Page 26: Jumpers Setting And Connectors

    2.3 Jumpers Setting and Connectors 1. JP5: (2.0mm Pitch 1X2 box Pin Header),ATX Power and Auto Power on jumper setting. Mode Open ATX Power Close Auto Power on (Default) 2. JP3: (2.0mm Pitch 1X2 Pin Header)CMOS clear jumper, CMOS clear operation will permanently reset old BIOS settings to factory defaults.
  • Page 27 Model DC_IN1 SBC-7106-N2600 180°Connector SBC-7106-N2600-P 45°Connector SBC-7106-D2550 45°Connector 5. CPU_FAN1: (2.54mm Pitch 1x3 Pin Header),Fan connector, cooling fans can be connected directly for use. You may set the rotation condition of cooling fan in menu of BIOS CMOS Setup. Pin# Signal Name Ground Rotation detection...
  • Page 28 7. HDMI1: (HDMI 19P Connector), High Definition Multimedia Interface connector. 8. JP1: (2.0mm Pitch 2x3 Pin Header),COM1 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM1 port. JP1 Pin# Function Close 1-2 COM1 RI (Ring Indicator) (default) Close 3-4 COM1 Pin9=+5V (option)
  • Page 29 Step 2: Remove the storage cover Step 3: Unscrew the storage tray Step 4: Remove the storage tray...
  • Page 30 Step 5: The function switch setting shows up 10. S_422: (Switch), COM1 setting, it provides selectable RS232 or RS422 or RS485 serial signal output. Function S_422 Pin# RS232 OFF: (Default) Pin1, Pin2, Pin3, Pin4 RS422 (option) Pin1, Pin2, Pin3, Pin4 RS485 (option) Pin1, Pin2, Pin3, Pin4...
  • Page 31 RS232 (Default): Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP1 select Setting (RI/5V/12V) BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 1 Configuration【RS-232】...
  • Page 32 JP2: (2.0mm Pitch 2x3 Pin Header),COM2 jumper setting, pin 1~6 are used to select signal out of pin 9 of COM2 port. JP2 Pin# Function Close 1-2 COM2 RI (Ring Indicator) (default) Close 3-4 COM2 Pin9=+5V (option) Close 5-6 COM2 Pin9=+12V (option) COM2: (Type DB9),Rear serial port, standard DB9 Male serial port is provided to make a direct...
  • Page 33 LED3 Power status. LED STATUS. Green LED for Touch SATA_P: (2.5mm Pitch 1x2 box Pin Header), Two onboard 5V output connectors are reserved to provide power for SATA devices. Pin# Signal Name +DC5V Ground Note: Output current of the connector must not be above 1A. SATA2: (SATA 7Pin), SATA Connectors, one SATA connectors are provided, with transfer speed up to 3.0Gb/s.
  • Page 34 USB45 USB4/USB5：(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0 ports, High-speed USB 2.0 allows data transfers up to480 Mb/s ,support USB full-speed and low-speed signaling. Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A. If the external USB device current exceeds 1.5A, please separate connectors into different Receptacle.
  • Page 35 LA_DATAP1 LA_DATAN1 LA_DATAP2 LA_DATAN2 LA_DATAP3 LA_DATAN3 LA_CLKP LA_CLKN Ground Ground Ground Ground USB1 USB1_P USB1_N USB1 USB0 USB0_P USB0_N USB0 5V_USB01 5V_USB01 USB1 5V_USB01 5V_USB01 PWR LED PWR_LED+ HDD_LED+ HDD LED Ground Ground PWRBTN_ON- FP_RST- RESET PWR ON/OFF INVT1： (2.0mm Pitch 1x6 Pin wafer connector), Backlight control connector for LVDS. Pin# Signal Name +DC12V...
  • Page 36 COM3 BIOS Setup： Advanced/W83627UHG Super IO Configuration/Serial Port 3 Configuration 【RS-422】 Advanced/W83627UHG Super IO Configuration/Serial Port 3 Configuration 【RS-485】 31. CN3 (1.27mm Pitch 2X30 Pin Header), For expand output connector, It provides four GPIO, Two USB 2.0,one PS/2 mouse，one PS/2 keyboard,two uart,one PCIe x1,one SMbus. connected to the TB-528 riser Card.
  • Page 37 H1/H2: MPCIE1 SCREW HOLES, H1and H2 for mini PCIE card (30mmx30mm) assemble. TB-528C2ME1（option）: SBC-7106 Riser Card,TB-528C2ME1 CN3 connect to SBC-7106 CN3 pin Header. TB-528C2ME1 Top： CN3： (1.27mm Pitch 2X30 Pin Header),connect to SBC-7106 CN3 pin Header. M-PCIE1： (Socket 52Pin),mini PCIe socket, it is located at the top, it supports mini PCIe devices with USB2.0(USB2),Smbus,SIM and PCIe signal.
  • Page 38 Pin# Signal Name KBDATA MSDATA Ground KBCLK MSCLK GPIO1： (2.0mm Pitch 2x5 Pin Header),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use. Signal Name Pin# Pin# Signal Name Ground SMB_DATA_R SMB_CLK_R ICH_GPIO13_IN1 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB_23：...
  • Page 39 or 5V or 12v, For details, please refer to description of JP3. Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP5 Setting: Pin1-2 : RI (Ring Indicator) (default)
  • Page 40 CTS (Clear To Send) JP6 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option) COM_6（option）： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. They can be used directly via COM cable connection. Signal Name Pin# Pin#...
  • Page 41 Pin# Signal Name KBDATA MSDATA Ground KBCLK MSCLK GPIO1： (2.0mm Pitch 2x5 Pin Header),General-purpose input/output port, it provides a group of self-programming interfaces to customers for flexible use. Signal Name Pin# Pin# Signal Name Ground SMB_DATA_R SMB_CLK_R ICH_GPIO13_IN1 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB_23：...
  • Page 42 serial devices. COM5 port is controlled by pins No.1~6 of JP5,select output Signal RI or 5V or 12v, For details, please refer to description of JP3. Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send)
  • Page 43 CTS (Clear To Send) JP6 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option) COM_6（option）： (2.0mm Pitch 2X5 Pin Header),COM6 Port, up to one standard RS232 port are provided. hey can be used directly via COM cable connection. Signal Name Pin# Pin#...
  • Page 44 USB2.0 (USB2) NC (option) SMBus H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status. SIM1（option）： (SIM Socket 6 Pin), Support SIM Card devices. PS_ON1： (2.0mm Pitch 1X2 Pin Wafer), ATX Power and Auto Power on jumper setting. PS_ON Mode Close 1-2...
  • Page 45 Signal Name Pin# Pin# Signal Name Ground SMB_DATA_R SMB_CLK_R ICH_GPIO13_IN1 ICH_GPIO24_IN2 ICH_GPIO26_IN3 ICH_GPIO27_IN4 USB23： (Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0 ports, speed up to 480Mb/s. USB_23（option）： (2.0mm Pitch 2x5 Pin Header) ,Front USB connector, it provides one USB port via a dedicated USB cable, speed up to 480Mb/s.
  • Page 46 Pin# Signal Name DCD# (Data Carrier Detect) RXD (Received Data) TXD (Transmit Data) DTR (Data Terminal Ready) Ground DSR (Data Set Ready) RTS (Request To Send) CTS (Clear To Send) JP5 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option)
  • Page 47 JP6 Setting: Pin1-2 : RI (Ring Indicator) (default) Pin3-4 : 5V Standby power (option) Pin5-6:12V Standby power (option) S1： PWR BT: POWER on/off Button, They are used to connect power switch button. The two pins are disconnected under normal condition. You may short them temporarily to realize system startup &...
  • Page 48 SMBus H1/H2: MPCIE1 SCREW HOLES, H2 for mini PCIE card (30mmx30mm) assemble. H1 for mini PCIE card (30mmx50.95mm) assemble. LED1： Mini PCIe devices LED Status. SIM1（option）： (SIM Socket 6 Pin), Support SIM Card devices. PS2： (2.0mm Pitch 1X6 Pin Wafer), PS/2 keyboard and mouse port, the port can be connected to PS/2 keyboard or mouse via a dedicated cable for direct used.
  • Page 49 PSON_ATX Ground PSON_ATX Ground JP6： (2.0mm Pitch 2x3 Pin Header),COM6 setting jumper, pin 1~6 are used to select signal out of pin 9 of COM6 port. JP3 Pin# Function Close 1-2 RI (Ring Indicator) (default) Close 3-4 COM6 Pin9=+5V (option) Close 5-6 COM6 Pin9=+12V (option)
  • Page 50 JTAG： (2.0mm Pitch 2x5 Pin Header), Reserve. JP1： (2.0mm Pitch 1x2 Pin Header), Reserve. JP2： (2.0mm Pitch 1x2 Pin Header), Reserve. CAN12： (3.5mm Pitch 1x10 Pin connector), it provides two CAN-bus Interface. Pin# Channel Signal Name Function CANL2 CAN bus Signal L Terminal resistor R-(internally connected to CANL2) Shield cable (FG) CAN2...

  • Page 51: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup 3.1 Operations after POST Screen After CMOS discharge or BIOS flashing operation,.Press [Delete] key to enter CMOS Setup. After optimizing and exiting CMOS Setup, the POST screen displayed for the first time is as follows and includes basic information on BIOS, CPU, memory, and storage devices. 3.2 BIOS Setup Utility Press [Delete] key to enter BIOS Setup utility during POST, and then a main menu containing system summary information will appear.

  • Page 52: Main Settings

    3.3 Main Settings System Time: Set the system time, the time format is: Hour : 0 to 23...

  • Page 53: Advanced Settings

    Minute : 0 to 59 Second : 0 to 59 System Date: Set the system date, the date format is: Note that the ‘Day’ automatically changes when you set the date. Day: Month: 01 to 12 Date: 01 to 31 Year: 1998 to 2099 3.4 Advanced Settings...
  • Page 54 [248 PCI Bus Clocks] VGA Palette Snoop: [Disabled] [Enabled] PERR# Generation: [Disabled] [Enabled] SERR# Generation: [Disabled] [Enabled] 3.4.2 ACPI Settings Enable ACPI Auto Conf: [Disabled] [Enabled] Enable Hibernation: [Enabled] [Disabled] ACPI Sleep State: [Both S1 and S3 available for OS to choose from ] [Suspend Disabled] [S1 only(CPU Stop Clock) ] [S3 only (Suspend to RAM) ]...
  • Page 55 3.4.3 CPU Configuration Processor Type Intel(R) Atom(TM) CPU N2600 EMT64 Not Supported Processor Speed 1600MHz System Bus Speed 400MHz Ratio Status Actual Ratio System Bus Speed 400MHz Processor Stepping 30661 Microcode Revision L1 Cache RAM 2x56 k L2 Cache RAM 2x512 k Processor Core Dual...
  • Page 56 SATA Port1 Not Present SATA Controller(S): [Enabled] [Disabled] Configure SATA as: [IDE] [AHCI] Misc Configuration for hard disk 3.4.6 USB Configuration USB Configuration USB Devices: 1 Drive ，1 keyboard Legacy USB Support: [Enabled] [Disabled] EHCI Hand-off: [Disabled] [Enabled] USB hardware delays a USB transfer time-out: [20 sec] [10 sec]...
  • Page 57 3.4.7 W83627UHG Super IO Configuration W83627UHG Super IO ch W83627UHG Serial Port 1 Configuration UART Mode Selection： [RS-232] [RS-485] [RS-422] Serial Port 2 Configuration Serial Port 3 Configuration UART Mode Selection： [RS-485] [RS-422] Serial Port 4 Configuration Serial Port 5 Configuration Serial Port 6 Configuration 3.4.8 W83627UHG HW Monitor...
  • Page 58 3.4.10 PPM Configuration PPM Configuration EIST: [Enabled] [Disabled] CPU C State Report [Enabled] [Disabled] Enhanced C State [Enabled] [Disabled] CPU Hard C4E [Enabled] [Disabled] CPU C6 State [Enabled] [Disabled] C4 Exit Timing [Fast] [Default] [Slow] C-state POPDOWN [Enabled] [Disabled] C-state POPUP [Enabled] [Disabled]...

  • Page 59: Chipset Settings

    3.5 Chipset Settings 3.5.1 Host Bridge ►Memory Frequency and Timing ►Intel IGD Configuration ******* Memory Information ******* Memory Frequency 800 MHz(DDR3) Total Memory 2048 MB DIMM#0 Not Present DIMM#1 2048 MB Memory Frequency and Timing MRC Fast Boot [Enabled]...
  • Page 60 [Disabled] Max TOLUD [Dynamic] [1GB] [1.25GB] [1.5GB] [1.75GB] [2GB] [2.25GB] [2.5GB] [2.75GB] [3GB] [3.25GB] Intel IGD Configuration IGFX – Boot Type [VBIOS Default] [VGA] [LVDS] [HDMI] [VGA + LVDS] [VGA + HDMI] [LVDS + HDMI] LCD Panel Type [VBIOS Default] [640x480，18bit] [800x480，18bit] [800x600，18bit]...
  • Page 61 [Maintain Aspect Ratio] Active LFP [LVDS] [No LVDS] [EDP] IGD Clock Source [External Clock] [Internal Clock] Fixed Graphics Memory [128MB] [256MB] ALS Support [Disabled] [Enabled] Back light Control [DC] [PWM] Back light Logic [Positive] [Negative] Back light Control Lev [Auto] [Disabled] [Level 8] [Level 1]...

  • Page 62: Boot Settings

    [Enabled] [Disabled] PCI-Exp. High Priorit [Disabled] [Enabled] High Precision Event Timer Configuration High Precision Timer [Enabled] [Disabled] SLP_S4 Assertion Widt [1-2 Seconds] [2-3 Seconds] [3-4 Seconds] [4-5 Seconds] 3.6 Boot Settings...
  • Page 63 Setup Prompt Timeout Bootup Numlock State [On] [off] Quiet Boot [Disabled] [Enabled] Fast Boot [Enabled] [Disabled] Skip VGA [Enabled] [Disabled] Skip USB [Disabled] [Enabled] Skip PS2 [Disabled] [Enabled] CSM16 Module Version 07.69 Gatea20 Active [Upon Request] [Always] Option ROM Messages [Force BIOS] [Keep Current] Interrupt 19 Capture...

  • Page 64: Security Settings

    [UEFI only] Launch PXE OpROM poli [Do not Launch] [UEFI only] [Legacy only] Launch Storage OpROM [Legacy only] [Do not Launch] [UEFI only] Launch Video OpROM po [Do not Launch] [UEFI only] [Legacy only] Other PCI device ROM [UEFI OpROM] [Legacy OpROM] 3.7 Security Settings 3.7.1...

  • Page 65: Save And Exist Settings

    Type the password with up to 20 characters and then press <Enter> key. This will clear all previously typed CMOS passwords. You will be requested to confirm the password. Type the password again and press <Enter> key. You may press <Esc> key to abandon password entry operation.
  • Page 66 Save Changes and Exit Save & Exit Setup save Configuration and exit ? [Yes] [No] Discard Changes and Ext Exit Without Saving Quit without saving? [Yes] [No] Save Changes and Reset Save & reset Save Configuration and reset? [Yes] [No] Discard Changes and Reset Reset Without Saving Reset without saving? [Yes]...

  • Page 67: Chapter 4 Installation Of Drivers

    Chapter 4 Installation of Drivers This chapter describes the installation procedures for software and drivers under the windows 7. The software and drivers are included with the motherboard. The contents include Intel chipset driver, VGA driver, LAN drivers, Audio driver Installation instructions are given below. Important Note: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the installation of...

  • Page 68: Intel Chipset Driver

    4.1 Intel Chipset Driver To install the Intel chipset driver, please follow the steps below. Step 1. Select Intel (R) Chipset NM10 Express from the list Step 2. Click Next to setup program. NV-HMI-7XX User Manual...
  • Page 69 Step 3. Read the license agreement. Click Yes to accept all of the terms of the license agreement. Step 4. Click Next to continue. NV-HMI-7XX User Manual...
  • Page 70 Step 5. Click Next. Step 6. Select Yes, I want to restart this computer now. Click Finish, then remove any installation media from the drives. NV-HMI-7XX User Manual...

  • Page 71: Intel Graphics Media Accelerator Driver

    4.2 Intel Graphics Media Accelerator Driver To install the VGA drivers, follow the steps below to proceed with the installation. Step 1.Select Intel(R) VGA Chipset Driver. Step 2. Tick Automatically run WinSAT and enable the Windows Aero desktop theme(if supported). Click Next. NV-HMI-7XX User Manual...
  • Page 72 Step 3. Read license agreement. Click Yes. Step 4. Click Next. NV-HMI-7XX User Manual...
  • Page 73 Step 5. Click Next. Step 6. To restart the computer, select Yes, I want to restart this computer now. Then click Finish. NV-HMI-7XX User Manual...

  • Page 74: Intel (R) Network Adapter

    4.3 Intel (R) Network Adapter To install the Intel (R) Network Adapter device driver, please follow the steps below. Step 1. Select LAN Driver. Step 2. Select NV-HMI-7”~15”. NV-HMI-7XX User Manual...
  • Page 75 Step 3. Click Next to continue. Step 4. Click Install to begin the installation. NV-HMI-7XX User Manual...

  • Page 76: Realtek Alc662 Hd Audio Driver Installation

    Step 5. Click Finish to exist the wizard. 4.4 Realtek ALC662 HD Audio Codec Driver Installation To install the Realtek ALC662 HD Audio Codec Driver, please follow the steps below. Step 1. Select Realtek AL662 Audio Codec Driver from the list NV-HMI-7XX User Manual...
  • Page 77 Step 2. Click Next to continue. Step 3. Click Yes, I want to restart my computer now. Click Finish to complete the installation. NV-HMI-7XX User Manual...

  • Page 78: Chapter 5 Touch Screen Installation

    Chapter 5 Touch Screen Installation This chapter describes how to install drivers and other software that will allow your touch screen work with different operating systems. 5.1 Windows 2000/2003/Vista/WIN7 Universal Driver Installation for PenMount 6000 Series Before installing the Windows 2000/WIN7 driver software, you must have the Windows 2000/WIN 7 system installed and running on your computer.
  • Page 79 Step 2. Select Resistive Touch. Step 3. Click Next to continue. NV-HMI-7XX User Manual...
  • Page 80 Step 4. Read the license agreement. Click I Agree to agree the license agreement. Step 5. Choose the folder in which to install PenMount Windows Universal Driver. Click Install to start the installation. NV-HMI-7XX User Manual...
  • Page 81 Step 6. Wait for installation. Then click Next to continue. Step 7. Click Continue Anyway. NV-HMI-7XX User Manual...

  • Page 82: Installing Software (Projected Capacitive)

    Step 8. Click Finish to complete installation. 5.1.2 Installing Software (Projected Capacitive) Step 1. Insert the product CD, the screen below would appear. Click Touch Panel Driver. NV-HMI-7XX User Manual...
  • Page 83 Step 2. Select Projected Capacitive. Step 3. Click Next to continue. NV-HMI-7XX User Manual...
  • Page 84 Step 4. Select I accept the terms of the license agreement. Click Next. Step 5. Tick Install RS232 interface driver. Click Next. NV-HMI-7XX User Manual...
  • Page 85 Step 6. Select None. Click Next. Step 7. Click OK. Step 8. Tick Support Muti-Monitor System. Click Next. NV-HMI-7XX User Manual...
  • Page 86 Step 9. Go to C:\Program Files\eGalaxTouch. Click Next. Step 10. Click Next. NV-HMI-7XX User Manual...
  • Page 87 Step 11. Tick Create a eGalaxTouch Utility shortcut on desktop. Click Next. Step 12. Wait for installation. NV-HMI-7XX User Manual...

  • Page 88: Software Functions

    Step 13. Click Yes to do 4 point calibration. 5.2 Software Functions 5.2.1 Software Functions(Resistive Touch) Upon rebooting, the computer automatically finds the new 6000 controller board. The touch screen is connected but not calibrated. Follow the procedures below to carry out calibration. 1.
  • Page 89 Standard Calibration Click this button and arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence. After the fifth red point calibration is complete. To skip, press ‘ESC’. Advanced Calibration Advanced Calibration uses 4, 9, 16 or 25 points to effectively calibrate touch panel linearity of aged touch screens.
  • Page 90 Step 2.Click “Standard Calibration” to start calibration procedure NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Please follow the step as below: NV-HMI-7XX User Manual...
  • Page 91 Step 3.Come back to “PenMount Control Panel” and select Tools then click Advanced Calibration. Step 4. Select Device to calibrate, then you can start to do Advanced Calibration. NOTE: Recommend to use a stylus during Advanced Calibration for greater accuracy. NV-HMI-7XX User Manual...
  • Page 92 Plot Calibration Data Check this function and a touch panel linearity comparison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Turn off EEPROM storage The function disable for calibration data to write in Controller.
  • Page 93 About This panel displays information about the PenMount controller and driver version. NV-HMI-7XX User Manual...
  • Page 94 Multiple Monitors Multiple Monitors support from two to six touch screen displays for one system. The PenMount drivers for Windows 2000/WIN 7 support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
  • Page 95 3. Touch each screen as it displays “Please touch this monitor”. Following this sequence and touching each screen is called mapping the touch screens. 4. Touching all screens completes the mapping and the desktop reappears on the monitors. 5. Select a display and execute the “Calibration” function. A message to start calibration appears. Click OK.
  • Page 96 NOTES: 1. If you use a single VGA output for multiple monitors, please do not use the Multiple Monitor function. Just follow the regular procedure for calibration on each of your desktop monitors. 2. The Rotating function is disabled if you use the Multiple Monitor function. 3.

  • Page 97: Software Functions(Projected Capacitive)

    Control Panel Open Control Panel Windows Beep Setting Beep function for each device Right Button When you select this function, a mouse icon appears in the right-bottom of the screen. Click this icon to switch between Right and Left Button functions.
  • Page 98 Monitor Mapping To adjust touch panel To search for device NV-HMI-7XX User Manual...
  • Page 99 Setting Beep Beep On Touch Beep On Release Beep From System Beep Beep From Sound Card Linearization Style 9 points 25 points Double Click Time Shorter Longer Double Click Area Smaller Bigger Normal mode Simulate the mouse mode NV-HMI-7XX User Manual...
  • Page 100 Option Function Enable Constant Touch Enable Auto Right Click Enable Touch Enable Cursor Stabilization Constant Touch Area Auto Right Click Time NV-HMI-7XX User Manual...
  • Page 101 Tools Click OK to continue the settings. 4 Points Calibration Do 4 points alignment to match display. Clear and Calibrate Clear linearization parameter and do 4 points alignment. Linearization Do 9 points linearization for better touchscreen linearity. Draw Test Do draw test to verify the touch accuracy. NV-HMI-7XX User Manual...
  • Page 102 Display In this window, it shows the mode of display. Enable Multiple Monitors. Map to main display if system has only one display monitor Full Screen Lower Screen Left Screen Upper Screen Right Screen NV-HMI-7XX User Manual...
  • Page 103 Other Other mode of display. Quarter1~4 and Customized area. Active Area Drag active area to enable Active Area Function. NV-HMI-7XX User Manual...
  • Page 104 Hardware Saturn Hardware Configuration NV-HMI-7XX User Manual...
  • Page 105 About To display information about eGalaxTouch and its version. NV-HMI-7XX User Manual...

This manual is also suitable for:

Nv-hmi-708pNv-hmi-710pNv-hmi-712pNv-hmi-715pNv-hmi-710

Table of Contents