Table of Contents
Advertisement
ANT IN (AIR/CABLE)
4
‒ To view television channels correctly, the TV must receive a signal from one of the following sources:
‒ An outdoor antenna / A cable television system
DIGITAL AUDIO OUT (OPTICAL)
5
Connects to a Digital Audio component.
DATA
6
‒ Used to support data communication between the TV and the SBB.
‒ Connects using RJ-12 TV type plugs.
RJP
7
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
LAN
8
Connect to a wired LAN using CAT 7 cable.
AV IN
9
‒ Connect audio cables to "L-AUDIO-R" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
‒ Connect RCA audio cables (optional) to "L-AUDIO-R" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
‒ When connecting to AV IN, the colour of the
cable (yellow).
0 HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
HP-ID
!
Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. See page
16. When connecting Headphone to Headphone Box, it works same as Headphone function.
10
English
AV IN [VIDEO]
jack (yellow) does not match the colour of the video
Advertisement
Table of Contents
