Advertisement
Cable Connector
Power Switch
Fuse
5.0
Care and Storage
5.1
Cleaning the magnets
Over a period of time, the magnets may attract
ferrous debris. Exercise care to avoid setting the
actuator where the magnets might attract
debris. If this does occur, use a paper towel or
nylon bristle brush to clean the face of the
magnets. Keeping the magnet faces clean
ensures that maximum holding power is
maintained.
5.2
Storage
Remove all batteries from the control station if
the device will not be used for longer than 6
months.
Never store the batteries where the ambient
temperature might exceed 110º F.
Avoid getting the unit wet or storing it in a high
humidity location.
Advertisement
