Download Print this page

Martek Chicken Switch K-15 User Manual page 5

Portable actuator for remotely operating certain ite k breakers

STEP #2

–

Rotate the magnet levers

inward so that the magnets are retracted.

(shown by RED arrows)

STEP #3

–

Align the actuator on the top

of the breaker (shown by BLUE arrows)

STEP #4

–

While continuing to hold the

actuator frame against the top edge of the

breaker, flip the magnet levers (shown by

RED arrows) so the magnets engage the

switchgear door. NOTE: The actuator frame

must be against the top breaker edge or the

actuator plungers will not align properly with

the breaker TRIP and CLOSE buttons.