Philips 107T50/05 Electronic User's Manual page 14

107T Product Information
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change
either of these, the monitor will exit the sRGB mode and go to a color temperature setting of
6500K.
For more information on sRGB, please visit:
* These information are subject to change without notice.
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can
automatically reduce its power consumption when not in use. And if an input from a keyboard,
mouse or other input device is detected, the monitor will automatically "wake up". The following table
shows the power consumption and signaling of this automatic power saving features:
VESA's
Video
Mode
ON Active
OFF Blanked
E
This monitor is NERGY
determined that this product meets the
file:///D|/EDFU/crt_17_5/edoc/ENGLISH/107T/PRODUCT/PRODUCT.HTM (9 of 12)7/15/2004 5:51:39 PM
www.srgb.com
RETURN TO TOP OF THE PAGE
Power Management Definition
H- V-
Power Used
sync sync
Yes Yes Typical 68 W
No No
®
S
TAR compliant.
E
NERGY
Power Saving (%)
< 1W
A E S
s an NERGY TAR
®
S
TAR guidelines for energy efficiency.
LED color
0 % Green
Flashing
99%
Green
®
P PHILIPS
artner, has