Philips 109P40/40 Electronic User's Manual page 91

The OSD Controls
ADJUST SIDE ANGLES is highlighted.
After returning to MAIN CONTROLS . . .
...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDE
Smart
ANGLES and follow the directions.
Help
...to exit completely, press the
...to adjust only the BALANCED pincushion, follow steps 1 - 4 above, then press
the
ADJUST SIDE ANGLES
ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when
the picture is not square.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the button until ADJUST SHAPE is highlighted.
file:///D|/EDFU/crt_19_5/edoc/english/OSD/osd_cont.htm (14 of 27)2005-04-21 ¤W¤È 09:38:06
button, and follow steps 7 - 9.
button twice.