Philips 109P40/40 Electronic User's Manual page 101

The OSD Controls
4) Press the button to highlight DEGAUSS.
5) To degauss your screen, press the
CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted.
After returning to MAIN CONTROLS . . .
Smart
. . . to continue to ADJUST MOIRE, press the
Help
is highlighted. Next, start with step 3 under EXTRA CONTROLS, ADJUST MOIRE.
. . . to exit completely, press the
ADJUST MOIRE
(Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern
arising from the interference between two superimposed line patterns. To adjust your moire, follow
the steps below. Note: Use only if necessary. By activating ADJUST MOIRE, sharpness can be
affected.
1) Press the button on the monitor. The MAIN CONTROLS window appears.
2) Press the DOWN CURSOR button until EXTRA CONTROLS is highlighted.
file:///D|/EDFU/crt_19_5/edoc/english/OSD/osd_cont.htm (24 of 27)2005-04-21 ¤W¤È 09:38:06
button. Your screen will be degaussed, then the MAIN
button.
button until EXTRA CONTROLS