Synology Diskstation At A Glance - Synology DiskStation DS213 Quick Installation Manual

Synology DiskStation at a Glance

No. Article Name
1)
LED Indicators
2)
SD Card Slot
3)
USB 2.0 Port
4)
USB 3.0 Ports
5) Copy Button
6)
Power Button
7)
Fan
8)
RESET Button
9)
LAN Port
10) Power Port
4 Chapter 1: Before You Start
Location
The LED indicators are used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on
Front Panel
Page 16.
The Synology DiskStation offers SD card slot for accessing a SD card.
Front Panel
Front Panel
The Synology DiskStation offers USB ports for adding additional external hard
drives, USB printers, or other USB devices.
Back Panel
The Copy button lights up when you connect a USB Device to the USB port or
a SD card to the SD card slot on the front panel. Pressing the button will copy
Front Panel
the data from the connected USB device or SD card to Synology DiskStation's
internal HDD.
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The fan is built to exhaust waste heat out of Synology DiskStation. If the fan is
Back Panel
malfunctioning, the system will play beep sounds.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
The power port is where you connect the AC adapter to Synology DiskStation.
Back Panel
Description