Table of Contents
Advertisement
Section 3 - Configuration
Select Dynamic IP (DHCP) to obtain IP address information automatically
from your Internet Service Provider (ISP). Select this option if your ISP does not
specify an IP address to use.
Advanced Settings
Host Name:
The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually obtained automatically from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address
The default MAC address is set to the physical interface MAC address
Clone:
of port 1 on the COVR-C1210. You can use the drop-down menu to
replace the Internet port's MAC address with the MAC address of a
connected client.
Click Save when you are done.
D-Link COVR-C1210 User Manual
Dynamic IP (DHCP)
17
Advertisement
Table of Contents
