Web Based Installation - D-Link COVR-C1210 User Manual

Section 2 - Installation
If you do not wish to use the D-Link Wi-Fi app, you can manually set up the COVR-C1210 and configure your Covr Wi-Fi network
using the web-based user interface. Follow the instructions below to set up your COVR-C1210 AC1200 Dual Band Wi-Fi Router.
Step 1
Position the COVR-C1210 close to your Internet-connected modem. Next,
connect the power adapter to the device and plug the adapter into a power
outlet.
Step 2
Wait for the COVR-C1210 to boot up. When the COVR LED starts blinking
orange, wirelessly connect your computer to the Wi-Fi name (SSID) printed
on the back of the device, or on the included Quick Install Card.
Step 3
Type http://covr.local./ into a web browser and follow the on-screen
instructions to complete the setup.
Your COVR-C1210 AC1200 Dual Band Wi-Fi Router is now set up and ready to use. You can now configure your Covr Wi-Fi
settings using the free D-Link Wi-Fi mobile app or the web-based user interface. Refer to the Configuration section on page
page 9 for more information on configuring your network using the web-based user interface.
D-Link COVR-C1210 User Manual

Web Based Installation

Wi-Fi
Wi-Fi
http://covr.local./
A
G
SSID:
Password:
8