Dyna-Glo IR6PTDG-1/PMDG-1 Manual page 21

OPERATION
1. Turn off all electric power to the appliance if service is to be performed.
2. Push in gas control knob slightly and turn clockwise
DO NOT FORCE.
THERMOSTATIC CONTROL OPERATION (SELECT MODELS)
The thermostat used on this heater senses the room tempera-
ture. At times the room may exceed the set temperature. If so,
the burner will shut off. The burner will cycle back on when
room temperature drops below the set temperature. The control
knob can be set to any comfort level between "HIGH" (5) and
"LOW"(1) (See Fig. 25).
MANUAL CONTROL OPERATION
Manual valves remain burning in the desired setting until
manually turned to OFF "
LIGHTING INSTRUCTIONS
Burner Patterns (Thermostatic Control)
TO TURN OFF GAS TO APPLIANCE
"(See Fig. 25).
to "OFF" or "
Thermostatic
Fig. 25 - Control Knob Position
20
OFF
ON
" position.
Manual