Wolf CI152TS Use & Care Manual page 13

COOKTOP OPERATION
Cooktop Operation
BRIDGE ELEMENT (INDUCTION)
Setting controls:
To activate bridge, select desired power level on one of
1
the single elements.
Touch BRIDGE between corresponding element con-
2
trols to bridge elements front to back, BRG to bridge
elements side to side, or ALL BRIDGE to bridge all
elements. , or
To change power level, adjust the power level on any
3
active bridged element.
To turn off, touch ON/OFF on any active bridged
4
element.
For 36" induction cooktops, ALL BRIDGE should be used
for cookware larger than 12"
cookware, use the right rear element.
will illuminate respectively.
in diameter. For smaller
(305)
BRIDGE ELEMENT (ELECTRIC)
Setting controls:
To activate bridge, select desired power level on one of
1
the single elements.
Touch BRIDGE. will illuminate.
2
To change power level, adjust the power level on either
3
active bridged element.
To turn off, touch ON/OFF on either active bridged
4
element.
BRIDGE
Bridge element activation.
|
wolfappliance.com 13