Troubleshooting
file:///E|/專案/220EW9 EDFU/ENGLISH/220EW9/safety/saf_troub.htm (3 of 3)2008/5/9 下午 03:45:30
An after-image appears
An after-image remains after the
power has been turned off.
Green, red, blue, dark, and white dots
remains
For further assistance, refer to the
customer service representative.
RETURN TO TOP OF THE PAGE
If an image remains on the screen for an
extended period of time, it may be
imprinted in the screen and leave an after-
image. This usually disappears after a few
hours
This is characteristic of liquid crystal and is
not caused by a malfunction or
deterioration of the liquid crystal. The after-
image will disappear after a peroid of time.
The remaining dots are normal
characteristic of the liquid crystal used in
today's technology.
Consumer Information Centers
list and contact Philips