Operating Instructions, Tips; Overview Of The Control Panel - Samsung DV40J3000G Series User Manual

operating instructions, tips

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
Warning

oVErVIEW of thE control panEl

cycle selector
1
display
2
DV3000J_DC68-03170N-10_EN.indd 21
1
To select dryness level in Sensor Dry cycle. Very Dry, More Dry, Normal Dry
and Damp Dry are dryness level in Sensor Dry cycle.
Sensor Dry cycle automatically senses the moisture in the load and shuts
the dryer off when the load reaches the dryness level you have selected with
Dryness level.
To select Sensor Dry cycle with Temperature option.
Corresponding setting of the temperature option, refer to the "cycle chart"
VEry Dry & morE Dry – Use this cycle to dry such a large or bulkier
fabrics.
normal Dry – Default setting.
Damp Dry – Use this cycle for flat by hanger or ironing.
tImE Dry – TIME DRY allows you to select the desired cycle time. Turn the
Cycle Selector dial to TIME DRY, and then press the Time selection button.
quIck Dry – Provides a 40 minute drying cycle.
aIr fluff – The AIR FLUFF cycle tumbles the load at room temperature air.
WrInklE rElEaSE – The WRINKLE RELEASE cycle will release wrinkles
from items that are clean, dry, and only slightly wrinkled, such as clothes from
a crowded closet, suitcase or items that have been in the dryer too long after
the cycle has ended. WRINKLE RELEASE can be used with any temperature
selection.
The Drying light will illuminate and remain lit until the cycle is complete. When
your dryer is in the cool-down phase, the Cooling light will illuminate, When your
dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate.
When the cycle is complete, End light will illuminate in the display panel and until
you push the Start/Pause button or the Power button.
If your dryer is paused during a cycle, the indicator lights will blink until you press
the Start/Pause button.
English - 21
2 3 4 5 6 7
2019/6/15 10:12:50