Table of Contents
Advertisement
filter must be regularly drained. Per-
forming routine maintenance on the
air supply will allow the tool to oper-
ate more safely and will also reduce
wear on the tool.
2.
After each use:
• Clean the exterior of the Stapler us-
ing a clean cloth. Do not use sol-
vents. Do not immersed the tool in
liquid.
3.
Quarterly:
• Have the internal mechanism
cleaned, inspected, and lubricated
by a qualified technician. If the
vanes need replacement, all vanes
should be replaced as a set.
4.
To clear jams:
• Disconnect the Stapler from its air
supply.
• Empty the Magazine (73) and Cap
Canister (105) completely.
• Attempt to fire the Stapler into a
piece of scrap wood to ensure that
it is disconnected and incapable of
firing any staples/plastic caps.
• If the staple/plastic cap is jammed
in the discharge area, remove the
Connecting Plate (76) and use pliers
to remove the jammed staple/plastic
cap. Then re-attach the Connecting
Plate.
• If the staple is jammed inside the
Magazine (73), depress the Maga-
zine Latch (63). Pull back on the
Magazine. Use pliers to remove
the jammed staple. Then push the
Magazine forward until the Magazine
Latch catches.
• If the plastic cap is jammed inside
the Cap Canister (105), turn and
raise the Canister Latch (104). Use
SKU 99637
For technical questions, please call 1-800-444-3353.
pliers to remove the jammed plastic
cap. Then turn and lower the Can-
ister Latch to re-apply pressure on
the plastic caps.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION
OR WARRANTY OF ANY KIND TO
THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN
FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND
PARTS REPLACEMENTS SHOULD
BE UNDERTAKEN BY CERTIFIED
AND LICENSED TECHNICIANS, AND
NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS
TO THE ORIGINAL PRODUCT OR
REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT
PARTS THERETO.
Page 13
Advertisement
Table of Contents
