Haier AD322MMAHA Operation & Installation Manual page 15

Operation instruction
Fan Operation (Only for Code A)
TEMP
ON
OFF
4
SWING
1
MODE
HEALTH FRESH
2
CLOCK
TIMER
FILTER
LIGHT
RESET CODE
A
FAN
3
SLEEP
SET
HIGH/SO
HEAT
LOCK
1.Unit start
Press ON/OFF button to start your air conditioner.
Previous operation status appears on LCD (except for
TIMER, SLEEP, and SWING setting).
2.Select operating mode
Press MODE button. At each press, operation mode
changes as follows:
COOL
AUTO
Then select FAN
3. Adjust fan speed
Press FAN button. At each press, fan speed changes as
follows:
LOW
MID
Air conditioner will run at the selected fan speed.
When in AUTO mode, unit will adjust fan speed
according to room temperature automatically.
4. Unit stop
Press ON/OFF button to stop unit.
About FAN mode
When the air conditioner runs in FAN mode,
it is not possible to select AUTO FAN or to set temperature.
13
Remote controller
DRY HEAT FAN
HIGH