Echo SRM-266 Operator's Manual page 44

MAINTENANCE
4. Hold trimmer head while
turning knob clockwise to wind
line onto spool until about 13
cm (5 in.) of each line remains
exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators
located at the bottom of the
®
Speed-Feed head are worn
smooth, or if holes appear,
replacement of the cover or the
entire Speed-Feed
required.
Sharpening Metal Blades
Several styles of metal blades are
approved for use on the Brushcutter.
The 8-tooth blade can be sharpened
during normal maintenance. The
clearing blade and 80-tooth blade
require professional service.
Before sharpening, CLOSELY
inspect blade for cracks (look at the
bottom of each tooth and the center
mounting hole closely), missing
teeth and bending. If ANY of these
problems are discovered, replace
the blade.
44
®
head is
SRM-266
X7502028004
© 02/21 ECHO Incorporated