2.
The battery symbol indicates the state of
charge.
3.
When the battery is fully charged, you can
disconnect the charger by unplugging it.
If you don't use the phone for a long time, please
fetch out the battery.
Keeping the charger plugged to the mobile won't
damage the battery after it is fully charged.
"
'
1.
Remove the protective rubber cap outwards.
2.
Gently slip the card into the Micro-SD card
slot with the card's golden contact facing you
from the bottom side of the card.
3.
( #
To remove the Micro-SD card, gently press the
top of it inside its slot. When it pops up, you
may remove it from the phone.
+