Download Print this page

Philips CT0392BLK/40 Manual page 57

Philips mobile phone ct0392blk 392
Hide thumbs Also See for CT0392BLK/40:

Advertisement

Remove and reinstall the battery.
2 '
Make sure you plugged the jack
$
of the charger into the correct
connector. Then charge the phone
until the battery icon has stopped
scrolling. Finally, unplug from
the charger and try to switch the
mobile on.
Somebody tried to use your
2
'
$
phone but didn't know the PIN
5 / : 8 $
code nor the unblocking code
$
(PUK). Contact your service
provider.
To receive all calls, make sure
A
*
that none of the features in "Call
&
divert" is activated.
#(
The network connection is lost.
2
!
Either you are in a radio shadow
'
(in a tunnel or between tall
buildings) or you are outside the
network coverage area. Try from
another place, try to reconnect to
the network (especially when
abroad), or contact your network
operator for assistance/informa-
tion about the network.
The
2
'
slowly at very low temperatures.
B '
This is normal and does not affect
C
'
the operation of the phone. Take
'
$ D
the phone to a warmer place and
- '
try again.
In other cases please contact your
phone supplier.
Some
A
B
message exchanges with other
3
networks. First check that you
entered the number of your SMS
centre, or contact your operator
for detailed information on this
subject.
display
responds
more
networks
don't allow
2 !

Advertisement

loading

This manual is also suitable for:

Ct0392blk