Download Print this page

Philips CT0392BLK/40 Manual page 7

Philips mobile phone ct0392blk 392
Hide thumbs Also See for CT0392BLK/40:

Advertisement

To prevent scratch the screen, do not use an actual
pen, pencil or other sharp objects instead of stylus.
#
Press and hold
animation is showed on the screen.
When switch on the phone, the phone may remind
you
to enter the PIN code. The PIN code is
predefined and supplied by your operator or retailer.
To personalize the PIN code, see "Change
Password" on page 47.
If you enter an incorrect PIN code for three times,
your SIM card is blocked. To unblock it, you must
request the PUK code from your operator.
Please calibrate the touch screen with the stylus
before using the first time, and refer to the Pen
Calibration for details.
&
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert
will warn you when the battery level is low. If the
battery is empty, the battery symbol indicators will
(
until the power-on/off
reappear after the battery is charged up for 2 or 3
minutes.
In idle mode, tap the battery icon to view its
remaining capacity.
1.
Once the battery and back cover are attached
to the phone, plug the charger to the connector
(supplied with the phone, in the box) into the
socket at the base of the phone on one end.
Check that the arrow on the connector is facing
towards the phone. Then plug the other end of
the charger to an easily accessible AC power
socket.
To prevent damage of the phone, do not make a
call or send SMS while the battery is charging!

Advertisement

loading

This manual is also suitable for:

Ct0392blk