Table of Contents
Advertisement
Remove the protective film covering the screen before
using the phone.
Switch on the phone
To switch on the phone, long press ) key. Enter
the PIN code if required. It is preconfigured and
communicated to you by your operator or retailer. For
more information on PIN code, see "Security Setup".
If you enter an incorrect PIN code three times in
succession, your SIM card will be locked. To unlock it,
you must obtain the PUK code from your network
operator.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low. Once you
have installed the battery, you can start charging the
phone.
Plug in the charger connector as shown below. Then
plug the other end into a mains AC power socket.
6
During charging, the charge indicators will scroll. It
takes around 3 hours to fully charge the battery.
When all the scroll bars are steady, the battery is fully
charged. You can then disconnect the charger.
Keeping the charger plugged to the mobile phone when
the battery is fully charged will not damage the
battery. The only way to turn off the charger is to unplug
it, so use an easily accessible AC power socket.
Getting Started
Advertisement
Table of Contents
