Page 1
INSTRUCTION MANUAL Flat Top Display Freezer SD320P SD420P SD520P SD620P Please read this user’s manual thoroughly before using. Keep this manual handy for further reference.
Warranty Information One YEAR WARRANTY All claims for parts or labor must be made directly through Atosa. All claims must include: model number of the unit. the serial number. proof of purchase, date of installation. and all pertinent information supporting the alleged defect. In case of compressor replacement under warranty.
Page 3
ACTS OF GOD: Atosa is not responsible for the repair or replacement of any parts that are determined to have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of God.
The freezers are for preserving bagged, or securely wrapped in a container). The operating temperature for frozen food maintenance is: ■ Between -8°F and -1°F at room temperature of 109°F and 60% RD. --Technical Specification Model SD320P SD420P SD520P SD620P Rated Electric 220~240V...
Installation Instruction --Unpacking and Handling The freezer is in the package of cardboard box with foam boards protect when it arrives at user’s place. The freezer must be transported and handled with care to avoid posing a hazard to persons or property. Never place a freezer on its side or turn it upside down as this may damage or impair operation of the refrigerated unit.
Operation Instruction --Setting temperature control For safe food storage, let the freezer run for 4 hours continuously, before placing food into the cabinet. The temperature setting of the freezer can be adjusted by moving the thermostat axis position. It can be changed with screw driver or a coin shaped tool.The recommended setting for the freezer is at position “4”.
Maintenance Instruction --Care and Cleaning The freezer should be cleaned periodically; generally clean it every 30-45 days. Unplug before cleaning and use a soft cloth with a solution of warm water and mild soap to scrub inside and outside of the cabinet.
--TroubleShooting Problem or Concern Possible Cause Common Solution The plug isn’t connected to the The indicator is not on. Replug it. socket really. The compressor doses not start. no power Connect the socket with power. The indicator is on ,but the compressor doesn’t work and The power voltage is<98V.