Table of Contents
Advertisement
Basic setting
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
Changing basic settings
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows H:xx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press
or
5.
display shows the right value.
You can change several settings.
Display text
Cn:00
rc:01
rE:
.
repeatedly until
repeatedly until the
Selection
Cn:00 - Cn:01
rc:00 - rc:02
Start with
Y:ES
Confirm with
To save the settings, press
6.
Close the appliance door.
7.
Home Connect
Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect en
Description
Switch the wireless network connec-
tion on or off.
Level "Cn:00" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the Home Connect app.
→ "Home Connect ", Page 39
Activate or deactivate
→ "Remote Start ", Page 40.
The following settings are possible:
¡ With the setting "rc:00", the func-
tion is permanently deactivated.
¡ With the setting "rc:01", the func-
tion can be selected via the
button.
→ "Activating Remote Start ",
Page 41
¡ With the setting "rc:02", the func-
tion is permanently activated.
This basic setting is not available un-
til after you have connected the
device with the Home Connect app.
→ "Home Connect ", Page 39
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.
for 3 seconds.
39
Advertisement
Table of Contents
