40-INCH EXERCISE or Scan code: TRAMPOLINE MODEL# 9040MT At GQBrands®, we want all of our customers to be completely satisfied with their purchase. Take time to review the contents of To order these parts, or if you have any other questions or concerns...
PARTS LIST Part # Description Part# Description Frame Jumping Mat Washer Spring Frame Pad W-Hook Leg with Cap Large Square Washer T-Section Piece 40mm Square Neck Bolts GQBrands.com CustomerService@GQBrands.com 1-866-498-5269...
Page 5
& flat surface to install. Make sure that there are no obstructions in your way when building the Mini Trampoline. NOTE: Make sure that the spring ends are facing up, and the logo printed on the Jumping Mat is facing the floor. T-Section Locations MODEL# 9040MT...
Page 6
ASSEMBLY INSTRUCTIONS STEP 2: Parts: Part 5 (x12) - T-Section Pieces Part 6 (x6) - 40mm Square Neck Bolts Part 7 (x6) - Nuts Part 11 (x6) - Large Square Washer Locate the six T-Section openings in the frame (Shown in page 5) to begin installing the T-Sections Pieces into the Frame.
Page 7
(10) Repeat this process until you have all six assembled Legs with Caps (Part 10). x6 Assembled Legs MODEL# 9040MT...
Page 8
ASSEMBLY INSTRUCTIONS STEP 5: Parts: Part 6 (x6) - 40mm Square Neck Bolts Part 7 (x6) - Nuts Part 8 (x6) - Washers Part 10 (x6) - Leg with Caps A. Place all assembled legs inside the inserts of the T section. Align openings from the T-Sections and Legs.
FREQUENTLY ASKED QUESTIONS • Question: “One of my trampoline legs has • Question: “I had a part missing from my • Question: “How do I remove the black box” or “something was damaged during caps on the frame of the trampoline?” broken”...
Need help?
Do you have a question about the 9040MT and is the answer not in the manual?
Questions and answers